Failsafe Actions
The Failsafes tab defines the automatic protective action the aircraft takes when a triggering condition is detected. Each trigger has its own independent action picker.
Triggers
Network — Signal Loss
Activated when the telemetry link between the dashboard and the aircraft drops.
Network — RC Link Loss
Activated when the RC controller connection is lost.
Battery — Low Battery
Activated when the battery percentage falls to the low-battery threshold set in the Drone tab.
Available Actions
Each trigger can be set to one of the following:
| Action | Behaviour |
|---|---|
| Hover | Aircraft stops and hovers in place until battery forces a landing |
| Landing | Aircraft descends and lands immediately at its current position |
| Go to SafeLocation | Aircraft navigates to the configured Safe Location before landing |
| Go To Dock | Aircraft returns to the docking station |
| Warning | Triggers an alert only; no automatic flight action |
DJI Dock 3
Signal Loss Action is disabled when a DJI Dock 3 is selected because that hardware manages signal-loss behaviour internally. The field is visually greyed out and cannot be changed from the dashboard.
Always verify your failsafe settings before deploying in a new location. If your Safe Location has not been configured, selecting “Go to SafeLocation” will cause unexpected behaviour.